//
TPS22965DSGR
LOAD SWITCH N-CHAN 6A 16MΩ 8WSON
Texas Instruments
View in 3D
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
Single-channel N-channel MOSFET load switch with ultra-low 16-mΩ on-resistance, supporting 6-A continuous current over 0.8–5.7-V input range. Features configurable rise time to minimize inrush current, 50-µA quiescent current, and quick output discharge. Ideal for power management in mobile devices, notebooks, and consumer electronics requiring efficient power distribution.
Package: DFN-8 (2×2mm) · 8 pins
Why does this need a breakout?
Hand-soldering 0.5mm pitch pads is extremely difficult without specialized equipment, and the exposed leads cannot access a breadboard. A breakout board with standard 0.1" headers lets you prototype high-voltage DC-DC converters like the MAX15062 without requiring reflow soldering or custom PCBs, making rapid iteration practical for industrial and sensor applications.
Specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | Texas Instruments |
| Part Number | TPS22965DSGR |
| Package | DFN-8 (2×2mm) |
| Pin Count | 8 |
| Current - Output (Max) | 6A |
| Input Type | Non-Inverting |
| Interface | On/Off |
| Number of Outputs | 1 |
| Output Configuration | High Side |
| Output Type | N-Channel |
| Rds On (Typ) | 16mOhm |
| Voltage - Load | 2.5V ~ 5.7V |
| Voltage - Supply (Vcc/Vdd) |
What's Included
BILL OF MATERIALS
- 1x TPS22965DSGR soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS
WIDTH
< 0.9" (straddles breadboard)
PITCH
2.54mm standard
SOLDER
Lead-free, reflow assembled
FINISH
FR4, lead-free HASL