//
TL082IDT
IC OPAMP JFET DUAL 16V/µS 8-SOIC
STMicroelectronics
View in 3D
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
Dual operational amplifier with JFET input stage featuring high input impedance, low input bias current, and high slew rate of 16 V/µs. Includes internal frequency compensation and output short-circuit protection. Suitable for audio, instrumentation, and general-purpose signal conditioning applications requiring low noise and high input impedance.
Package: SOIC-8 (3.9×4.9mm) · 8 pins
Why does this need a breakout?
An 8-pin SOIC with 1.27mm pitch is too fine for breadboards and hand-soldering without a microscope. A breakout board routes these pins to standard 0.1" headers, enabling rapid prototyping and reliable connections for op-amps, transceivers, and small power MOSFETs without requiring reflow equipment.
Specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | STMicroelectronics |
| Part Number | TL082IDT |
| Package | SOIC-8 (3.9×4.9mm) |
| Pin Count | 8 |
| Current - Output / Channel | 40 mA |
| Current - Supply | 1.4mA |
| Gain Bandwidth Product | 4 MHz |
| Number of Circuits | 2 |
| Slew Rate | 16V/µs |
| Voltage - Supply Span (Max) | 36 V |
| Voltage - Supply Span (Min) | 6 V |
What's Included
BILL OF MATERIALS
- 1x TL082IDT soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS
WIDTH
< 0.9" (straddles breadboard)
PITCH
2.54mm standard
SOLDER
Lead-free, reflow assembled
FINISH
FR4, lead-free HASL