//
TJA1044GT/3Z
IC TRANSCEIVER CAN HS 1MBPS 8SO
NXP USA Inc.
View in 3D
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
High-speed CAN transceiver for automotive 12V applications implementing ISO 11898-2:2024 and SAE J2284 standards. Provides differential transmit/receive interface between CAN protocol controller and physical bus with low-current standby mode and bus wake-up capability. Supports data rates up to 1 Mbit/s with CAN FD fast phase compatibility to 5 Mbit/s.
Package: SOIC-8 (3.9×4.9mm) · 8 pins
Why does this need a breakout?
An 8-pin SOIC with 1.27mm pitch is too fine for breadboards and hand-soldering without a microscope. A breakout board routes these pins to standard 0.1" headers, enabling rapid prototyping and reliable connections for op-amps, transceivers, and small power MOSFETs without requiring reflow equipment.
Specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | NXP USA Inc. |
| Part Number | TJA1044GT/3Z |
| Package | SOIC-8 (3.9×4.9mm) |
| Pin Count | 8 |
| Data Rate | 5Mbps |
| Duplex | Half |
| Number of Drivers/Receivers | 1/1 |
| Protocol | CANbus |
| Type | Transceiver |
| Voltage - Supply | 4.75V ~ 5.25V |
What's Included
BILL OF MATERIALS
- 1x TJA1044GT/3Z soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS
WIDTH
< 0.9" (straddles breadboard)
PITCH
2.54mm standard
SOLDER
Lead-free, reflow assembled
FINISH
FR4, lead-free HASL