//
TJA1042T/3/1J
CAN TRANSCEIVER HS 5MBPS 8SO
NXP USA Inc.
View in 3D
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
High-speed CAN transceiver for automotive controller area networks, supporting ISO 11898-2:2016 and data rates up to 5 Mbps in CAN FD fast phase. Features low-current standby mode with bus wake-up, improved EMC/ESD performance, and passive behavior when unpowered. Suitable for 12V and 24V systems with optional 3.3V to 5V microcontroller interface.
Package: SOIC-8 (3.9×4.9mm) · 8 pins
Why does this need a breakout?
An 8-pin SOIC with 1.27mm pitch is too fine for breadboards and hand-soldering without a microscope. A breakout board routes these pins to standard 0.1" headers, enabling rapid prototyping and reliable connections for op-amps, transceivers, and small power MOSFETs without requiring reflow equipment.
Specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | NXP USA Inc. |
| Part Number | TJA1042T/3/1J |
| Package | SOIC-8 (3.9×4.9mm) |
| Pin Count | 8 |
| Data Rate | 5Mbps |
| Duplex | Half |
| Number of Drivers/Receivers | 1/1 |
| Protocol | CANbus |
| Type | Transceiver |
| Voltage - Supply | 4.5V ~ 5.5V |
What's Included
BILL OF MATERIALS
- 1x TJA1042T/3/1J soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS
WIDTH
< 0.9" (straddles breadboard)
PITCH
2.54mm standard
SOLDER
Lead-free, reflow assembled
FINISH
FR4, lead-free HASL