//
ISO7741DWR Breakout
DIGITAL ISOLATOR 5KV 4CH 16-SOIC
View in 3D
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
Four-channel digital isolator providing 5kV galvanic isolation between logic circuits. Features independent channels for simultaneous bidirectional or unidirectional signal isolation with integrated high-speed gate drivers. Commonly used in motor control, power conversion, and industrial interfaces requiring robust noise immunity and ground separation.
Package: SOIC-16W (7.5mm wide) · 16 pins
Why does this need a breakout?
SOIC-16W uses 1.27mm pitch and surface-mount construction, making it difficult to hand-solder and incompatible with breadboards. A breakout board converts the 16 pins to through-hole connectors, enabling direct breadboarding and eliminating soldering risk during prototyping of real-time clocks, transceivers, flash memory, and gate-drive optocouplers.
Component specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | Texas Instruments |
| Part Number | ISO7741DWR |
| Package | SOIC-16W (7.5mm wide) |
| Pin Count | 16 |
| Channel Type | Unidirectional |
| Data Rate | 100Mbps |
| Number of Channels | 4 |
| Rise / Fall Time (Typ) | 2.4ns, 2.4ns |
| Type | General Purpose |
| Voltage - Isolation | 5000Vrms |
| Voltage - Supply | 2.25V ~ 5.5V |
What's Included
BILL OF MATERIALS
- 1x ISO7741DWR soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS