//
DJI-SDK-CC Breakout
IC AUTHENTICATION I2C 1.62-5.5V 8DFN
View in 3D
£4.82
Out of stock
FREE UK SHIPPING on orders over £30
Estimated dispatch time will be calculated after checkout and emailed to you as soon as possible.
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
Hardware security chip that authenticates third-party payloads to DJI aircraft over the E-Port and E-Port Lite interfaces. Without it the Payload SDK will not function. Operates from 1.62V to 5.5V across -40°C to 85°C and communicates over I²C at address 0x2A up to 400kHz. The PSDK library handles the certification protocol and security algorithm internally, so an integrator only registers a standard I²C device interface. Requires PSDK 3.10.0 or later and is supported on Matrice 4E/4T and subsequent models.
Package: USON-8-1EP (3×2mm, EP) · 8 pins
Why does this need a breakout?
Hand-soldering 0.5mm pitch USON is tedious and error-prone; a breakout board with standard 2.54mm headers lets you prototype on breadboards without reflow. The tiny 3×2mm package also makes direct integration risky during development. This board bridges the gap between evaluation and production.
Component specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | DJI |
| Part Number | DJI-SDK-CC |
| Package | USON-8-1EP (3×2mm, EP) |
| Pin Count | 8 |
| Clock Frequency | 400kHz |
| Interface | I2C |
| Voltage - Supply | 1.62V~5.5V |
What's Included
BILL OF MATERIALS
- 1x DJI-SDK-CC soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS