//
AP22653W6-7
LOAD SWITCH PRECISION CURRENT LIMIT 2.1A SOT26
Diodes Incorporated
View in 3D
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
Single-channel precision load switch with programmable current limiting from 125mA to 2665mA via external resistor. Supports up to 2.1A continuous load current with fast 5µs short-circuit response. Provides overcurrent, overtemperature, reverse-current blocking, and thermal protection with open-drain fault output and 0.5ms soft-start. Operates 3.0V to 5.5V.
Package: SOT-23-6 · 6 pins
Why does this need a breakout?
SOT-23-6 packages house precision regulators, voltage references, and level shifters with 0.95mm pin pitch—too fine for hand soldering and incompatible with breadboards. A breakout board provides through-hole headers for prototype work, eliminating soldering difficulty while enabling quick circuit iteration. Essential for developing with compact analog and power management ICs.
Specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | Diodes Incorporated |
| Part Number | AP22653W6-7 |
| Package | SOT-23-6 |
| Pin Count | 6 |
| Current - Output (Max) | 2.1A |
| Input Type | Non-Inverting |
| Interface | On/Off |
| Number of Outputs | 1 |
| Output Configuration | High Side |
| Output Type | P-Channel |
| Rds On (Typ) | 65mOhm |
| Voltage - Load | 3V ~ 5.5V |
| Voltage - Supply (Vcc/Vdd) |
What's Included
BILL OF MATERIALS
- 1x AP22653W6-7 soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS
WIDTH
< 0.9" (straddles breadboard)
PITCH
2.54mm standard
SOLDER
Lead-free, reflow assembled
FINISH
FR4, lead-free HASL