//
74HCT4067PW-Q100J Breakout
IC MUX/DMUX 16:1 60-80OHM 24TSSOP
View in 3D
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
16-channel analog multiplexer/demultiplexer (SP16T) switch with four binary select inputs, common I/O, and enable control. Operates from 2.0V to 10.0V with typical on-resistance of 60-80Ω depending on supply voltage. AEC-Q100 automotive qualified for analog/digital signal routing, multiplexing, and gating applications.
Package: TSSOP-24 (4.4×7.8mm) · 24 pins
Why does this need a breakout?
Hand-soldering 0.65mm pitch traces is difficult without proper equipment; a breakout board with standard 0.1in header spacing lets you breadboard-prototype and test these compact devices easily. Commonly used for I2C/SMBus I/O expanders and mixed-signal microcontrollers, this breakout eliminates fine-pitch soldering and allows rapid iteration during development.
Component specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | Nexperia USA Inc. |
| Part Number | 74HCT4067PW-Q100J |
| Package | TSSOP-24 (4.4×7.8mm) |
| Pin Count | 24 |
| -3db Bandwidth | 100MHz |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Number of Circuits | 1 |
| On-State Resistance (Max) | 120Ohm |
| Switch Time (Ton, Toff) (Max) | 65ns, 60ns |
| Voltage - Supply, Single (V+) | 4.5V ~ 5.5V |
What's Included
BILL OF MATERIALS
- 1x 74HCT4067PW-Q100J soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS