//
VOM617AT Breakout
OPTOISO 3.75KV 1CH PHOTOTRANS 4-SOP
View in 3D
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
Single-channel optoisolator with GaAs infrared LED coupled to silicon phototransistor, providing 3750V RMS isolation. Features 50-600% current transfer ratio at 5mA input, low saturation voltage, and fast switching times. Rated -55°C to +110°C, designed for signal transmission in PLCs, telecom, solar inverters, and industrial control applications.
Package: SOP-4 (3.8×4.1mm, P2.54mm) · 4 pins
Why does this need a breakout?
This 4-pin SOP photorelay is too small and tightly pitched (2.54mm) for reliable hand soldering or breadboard use. A breakout board brings the pins to standard 0.1-inch spacing, enabling rapid prototyping of optoisolated switching circuits without the frustration of soldering microscopic leads or dealing with isolation requirements.
Component specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | Vishay Semiconductor Opto Division |
| Part Number | VOM617AT |
| Package | SOP-4 (3.8×4.1mm, P2.54mm) |
| Pin Count | 4 |
| Current - DC Forward (If) (Max) | 60 mA |
| Current - Output / Channel | 50mA |
| Input Type | DC |
| Number of Channels | 1 |
| Output Type | Transistor |
| Rise / Fall Time (Typ) | 3µs, 3µs |
| Voltage - Forward (Vf) (Typ) | 1.1V |
| Voltage - Isolation | 3750Vrms |
| Voltage - Output (Max) | 80V |
What's Included
BILL OF MATERIALS
- 1x VOM617AT soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS
WIDTH
< 0.9" (straddles breadboard)
PITCH
2.54mm standard
SOLDER
Lead-free, reflow assembled
FINISH
FR4, lead-free HASL