//
TL064CDT Breakout
OPAMP JFET QUAD 3.5V/µS 200µA SO-14
View in 3D
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
Quad JFET input operational amplifier featuring very low power consumption at 200 µA and high slew rate of 3.5 V/µs. Each of four independent op-amps offers high input impedance, low input bias/offset currents, and wide common-mode voltage range. Ideal for low-power signal conditioning, audio preamps, and instrumentation applications where minimal quiescent current is critical.
Package: SOIC-14 (3.9×8.7mm) · 14 pins
Why does this need a breakout?
Manual soldering of 1.27mm pitch SOIC-14 leads is tedious and error-prone; a breakout board eliminates this with pre-soldered pads and convenient 0.1-inch headers for breadboard prototyping. Ideal for developing capacitive touch sensor applications or other logic circuits without the fine-pitch assembly hassle.
Component specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | STMicroelectronics |
| Part Number | TL064CDT |
| Package | SOIC-14 (3.9×8.7mm) |
| Pin Count | 14 |
| Current - Output / Channel | 20 mA |
| Current - Supply | 200µA (x4 Channels) |
| Gain Bandwidth Product | 1 MHz |
| Number of Circuits | 4 |
| Slew Rate | 3.5V/µs |
| Voltage - Supply Span (Max) | 36 V |
| Voltage - Supply Span (Min) | 6 V |
What's Included
BILL OF MATERIALS
- 1x TL064CDT soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS
WIDTH
< 0.9" (straddles breadboard)
PITCH
2.54mm standard
SOLDER
Lead-free, reflow assembled
FINISH
FR4, lead-free HASL