//
SN74LVC574APWR Breakout
IC FF D-TYPE 8-BIT 3-STATE 20-TSSOP
View in 3D
£3.93
Out of stock
FREE UK SHIPPING on orders over £30.00
Estimated dispatch time will be calculated after checkout and emailed to you as soon as possible.
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
Octal edge-triggered D-type flip-flop with 3-state outputs, operating from 1.65V to 3.6V and accepting 5.5V input levels. Features 7ns max propagation delay at 3.3V, buffered output-enable control, and mixed-mode signal operation capability. Ideal for buffer registers, I/O ports, and bus drivers in low-voltage digital systems.
Package: TSSOP-20 (4.4×6.5mm) · 20 pins
Why does this need a breakout?
Hand-soldering 0.65mm pitch leads is tedious and error-prone; a breakout board with standard 0.1" headers lets you prototype I/O expanders and logic gates on breadboards without a reflow oven. The compact SSOP package also becomes DIP-friendly, eliminating jumper spaghetti and reducing assembly mistakes during development cycles.
Component specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | Texas Instruments |
| Part Number | SN74LVC574APWR |
| Package | TSSOP-20 (4.4×6.5mm) |
| Pin Count | 20 |
| Clock Frequency | 150 MHz |
| Number of Bits per Element | 8 |
| Number of Elements | 1 |
| Output Type | Tri-State, Non-Inverted |
| Type | D-Type |
| Voltage - Supply | 1.65V ~ 3.6V |
What's Included
BILL OF MATERIALS
- 1x SN74LVC574APWR soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS
WIDTH
< 0.9" (straddles breadboard)
PITCH
2.54mm standard
SOLDER
Lead-free, reflow assembled
FINISH
FR4, lead-free HASL