//
MC33178DR2G Breakout
IC OPAMP DUAL LOW NOISE 5MHZ 8SOIC
View in 3D
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
Dual general-purpose operational amplifier featuring low power consumption (420µA per channel), low input offset voltage (0.15mV), and low noise performance suitable for audio and precision signal processing. Offers 5MHz bandwidth, 2V/µs slew rate, and 600Ω output drive capability with dual supply operation from ±2V to ±18V. Available in 8-SOIC surface-mount package.
Package: SOIC-8 (3.9×4.9mm) · 8 pins
Why does this need a breakout?
An 8-pin SOIC with 1.27mm pitch is too fine for breadboards and hand-soldering without a microscope. A breakout board routes these pins to standard 0.1" headers, enabling rapid prototyping and reliable connections for op-amps, transceivers, and small power MOSFETs without requiring reflow equipment.
Component specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | onsemi |
| Part Number | MC33178DR2G |
| Package | SOIC-8 (3.9×4.9mm) |
| Pin Count | 8 |
| Current - Output / Channel | 100 mA |
| Current - Supply | 1.7mA (x2 Channels) |
| Gain Bandwidth Product | 5 MHz |
| Number of Circuits | 2 |
| Slew Rate | 2V/µs |
| Voltage - Supply Span (Max) | 36 V |
| Voltage - Supply Span (Min) | 4 V |
What's Included
BILL OF MATERIALS
- 1x MC33178DR2G soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS
WIDTH
< 0.9" (straddles breadboard)
PITCH
2.54mm standard
SOLDER
Lead-free, reflow assembled
FINISH
FR4, lead-free HASL