//
HCPL0600R2 Breakout
OPTOISO 3.75KV 10MBIT/S OPEN-COLL 8-SOIC
View in 3D
£4.83
Out of stock
FREE UK SHIPPING on orders over £30.00
Estimated dispatch time will be calculated after checkout and emailed to you as soon as possible.
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
Single-channel optocoupler with AlGaAs LED and integrated photodetector logic gate, rated for 3.75 kVAC isolation and 10 Mbit/s data rates. Features open-collector output enabling wired-OR configurations, internal noise shield for superior common-mode rejection, and strobable output control. Ideal for ground loop elimination, logic interfacing, and galvanic isolation in switching power supplies and data transmission circuits.
Package: SOIC-8 (3.9×4.9mm) · 8 pins
Why does this need a breakout?
An 8-pin SOIC with 1.27mm pitch is too fine for breadboards and hand-soldering without a microscope. A breakout board routes these pins to standard 0.1" headers, enabling rapid prototyping and reliable connections for op-amps, transceivers, and small power MOSFETs without requiring reflow equipment.
Component specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | onsemi |
| Part Number | HCPL0600R2 |
| Package | SOIC-8 (3.9×4.9mm) |
| Pin Count | 8 |
| Current - DC Forward (If) (Max) | 50mA |
| Current - Output / Channel | 50 mA |
| Data Rate | 10Mbps |
| Input Type | DC |
| Number of Channels | 1 |
| Output Type | Open Collector |
| Rise / Fall Time (Typ) | 50ns, 12ns |
| Voltage - Forward (Vf) (Typ) | 1.75V (Max) |
| Voltage - Isolation | 3750Vrms |
| Voltage - Supply | 4.5V ~ 5.5V |
What's Included
BILL OF MATERIALS
- 1x HCPL0600R2 soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS
WIDTH
< 0.9" (straddles breadboard)
PITCH
2.54mm standard
SOLDER
Lead-free, reflow assembled
FINISH
FR4, lead-free HASL