//
AP2210K-5.0TRG1 Breakout
IC REG LINEAR 5V 300MA SOT23-5
View in 3D
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
Ultra-low dropout (ULDO) voltage regulator delivering 300mA at 5V output with 250mV typical dropout at full current. Features low noise (75dB PSRR at 100Hz), minimal 1µA standby current, and ±1% output accuracy. Includes logic-controlled enable, overcurrent, thermal, and reverse-current protection for battery-powered and RF-sensitive applications.
Package: SOT-23-5 · 5 pins
Why does this need a breakout?
This 0.95 mm pitch SMD package is incompatible with breadboards and difficult to hand-solder. A breakout board brings the five pins to standard 0.1″ spacing, enabling rapid prototyping without reflow equipment. Essential for evaluating precision analog ICs like current-sense amplifiers in development circuits.
Component specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | Diodes Incorporated |
| Part Number | AP2210K-5.0TRG1 |
| Package | SOT-23-5 |
| Pin Count | 5 |
| Current - Output | 300mA |
| Current - Supply (Max) | 15 mA |
| Number of Regulators | 1 |
| Output Configuration | Positive |
| Output Type | Fixed |
| Voltage - Input (Max) | 13.2V |
| Voltage - Output (Min/Fixed) | 5V |
What's Included
BILL OF MATERIALS
- 1x AP2210K-5.0TRG1 soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS
WIDTH
< 0.9" (straddles breadboard)
PITCH
2.54mm standard
SOLDER
Lead-free, reflow assembled
FINISH
FR4, lead-free HASL