//
ADUM1201ARZ-RL7 Breakout
DGTL ISOLATOR 2.5KV 2CH 8-SOIC
View in 3D
£9.43
Out of stock
FREE UK SHIPPING on orders over £30.00
Estimated dispatch time will be calculated after checkout and emailed to you as soon as possible.
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
Dual-channel digital isolator with 2.5kV galvanic isolation between input and output sides. Integrates two independent isolation channels in an 8-SOIC package, suitable for isolated communication interfaces, gate drivers, and low-speed signal isolation applications. Typical operating voltage 3.3V to 5V with propagation delays under 2µs.
Package: SOIC-8 (3.9×4.9mm) · 8 pins
Why does this need a breakout?
An 8-pin SOIC with 1.27mm pitch is too fine for breadboards and hand-soldering without a microscope. A breakout board routes these pins to standard 0.1" headers, enabling rapid prototyping and reliable connections for op-amps, transceivers, and small power MOSFETs without requiring reflow equipment.
Component specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | Analog Devices Inc. |
| Part Number | ADUM1201ARZ-RL7 |
| Package | SOIC-8 (3.9×4.9mm) |
| Pin Count | 8 |
| Channel Type | Unidirectional |
| Data Rate | 1Mbps |
| Number of Channels | 2 |
| Rise / Fall Time (Typ) | 10ns, 10ns |
| Type | General Purpose |
| Voltage - Isolation | 2500Vrms |
| Voltage - Supply | 2.7V ~ 5.5V |
What's Included
BILL OF MATERIALS
- 1x ADUM1201ARZ-RL7 soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS
WIDTH
< 0.9" (straddles breadboard)
PITCH
2.54mm standard
SOLDER
Lead-free, reflow assembled
FINISH
FR4, lead-free HASL