//
ACPL-064L-500E Breakout
OPTOISO 3.75KV 2CH PUSH PULL 8SO
View in 3D
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
Dual-channel optoisolator with 3.75 kV isolation rated for galvanic separation between logic circuits. Features push-pull output stages suitable for driving high-speed switching applications. Common in motor control, industrial equipment, and isolated gate drivers where noise immunity and voltage isolation are critical.
Package: SOIC-8 (3.9×4.9mm) · 8 pins
Why does this need a breakout?
An 8-pin SOIC with 1.27mm pitch is too fine for breadboards and hand-soldering without a microscope. A breakout board routes these pins to standard 0.1" headers, enabling rapid prototyping and reliable connections for op-amps, transceivers, and small power MOSFETs without requiring reflow equipment.
Component specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | Broadcom Limited |
| Part Number | ACPL-064L-500E |
| Package | SOIC-8 (3.9×4.9mm) |
| Pin Count | 8 |
| Current - DC Forward (If) (Max) | 8mA |
| Current - Output / Channel | 10 mA |
| Data Rate | 10MBd |
| Input Type | DC |
| Number of Channels | 2 |
| Output Type | Push-Pull, Totem Pole |
| Rise / Fall Time (Typ) | 12ns, 12ns |
| Voltage - Forward (Vf) (Typ) | 1.3V |
| Voltage - Isolation | 3750Vrms |
| Voltage - Supply | 2.7V ~ 5.5V |
What's Included
BILL OF MATERIALS
- 1x ACPL-064L-500E soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS
WIDTH
< 0.9" (straddles breadboard)
PITCH
2.54mm standard
SOLDER
Lead-free, reflow assembled
FINISH
FR4, lead-free HASL