//
74LVC4245APW,118 Breakout
IC XLTR BIDIR 3V/5V 8CH 24-TSSOP
View in 3D
£3.65
Out of stock
FREE UK SHIPPING on orders over £30.00
Estimated dispatch time will be calculated after checkout and emailed to you as soon as possible.
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
Octal dual supply translating transceiver with 3-state outputs for interfacing 3V and 5V logic buses. Features bidirectional data paths, output enable and direction control inputs, and Schmitt-trigger inputs for noise immunity. Supports supply voltages from 1.5V to 5.5V with latch-up and ESD protection.
Package: TSSOP-24 (4.4×7.8mm) · 24 pins
Why does this need a breakout?
Hand-soldering 0.65mm pitch traces is difficult without proper equipment; a breakout board with standard 0.1in header spacing lets you breadboard-prototype and test these compact devices easily. Commonly used for I2C/SMBus I/O expanders and mixed-signal microcontrollers, this breakout eliminates fine-pitch soldering and allows rapid iteration during development.
Component specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | Nexperia USA Inc. |
| Part Number | 74LVC4245APW,118 |
| Package | TSSOP-24 (4.4×7.8mm) |
| Pin Count | 24 |
| Channels per Circuit | 8 |
| Channel Type | Bidirectional |
| Number of Circuits | 1 |
| Output Type | Tri-State |
| Voltage - VCCA | 1.5 V ~ 5.5 V |
| Voltage - VCCB | 1.5 V ~ 3.6 V |
What's Included
BILL OF MATERIALS
- 1x 74LVC4245APW,118 soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS
WIDTH
< 0.9" (straddles breadboard)
PITCH
2.54mm standard
SOLDER
Lead-free, reflow assembled
FINISH
FR4, lead-free HASL