//
74HC4066PW,118 Breakout
IC ANALOG SWITCH QUAD SPST 50OHM 14TSSOP
View in 3D
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
Quad single-pole single-throw analog switch with four independently controlled channels. Each switch offers 50Ω typical on-resistance at 4.5V and active-high enable control. Suitable for audio routing, multiplexing, and analog signal switching applications requiring low distortion and minimal on-resistance across supply ranges of 2V to 15V.
Package: TSSOP-14 (4.4×5mm) · 14 pins
Why does this need a breakout?
The 0.65mm pitch on this 14-pin package makes hand soldering tedious and error-prone without magnification and fine tools. A breakout board routes each pin to standard 0.1-inch headers, enabling breadboard prototyping and simplifying connections for LIN transceivers, ADCs, digital potentiometers, and microcontrollers that typically come in this footprint.
Component specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | Nexperia USA Inc. |
| Part Number | 74HC4066PW,118 |
| Package | TSSOP-14 (4.4×5mm) |
| Pin Count | 14 |
| -3db Bandwidth | 200MHz |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Number of Circuits | 4 |
| On-State Resistance (Max) | 95Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 30ns, 20ns |
| Voltage - Supply, Single (V+) | 2V ~ 10V |
What's Included
BILL OF MATERIALS
- 1x 74HC4066PW,118 soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS
WIDTH
< 0.9" (straddles breadboard)
PITCH
2.54mm standard
SOLDER
Lead-free, reflow assembled
FINISH
FR4, lead-free HASL