//
NE5532DR Breakout
IC OPAMP DUAL 8SOIC 10MHZ 2.8MV OFFSET
View in 3D
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
Dual general-purpose operational amplifier in 8-SOIC package featuring low noise (25 nV/√Hz typical), low offset voltage (2.8 mV max), and 10 MHz gain-bandwidth product. Commonly used in audio applications, instrumentation, and precision signal conditioning where low distortion and noise performance are critical.
Package: SOIC-8 (3.9×4.9mm) · 8 pins
Why does this need a breakout?
An 8-pin SOIC with 1.27mm pitch is too fine for breadboards and hand-soldering without a microscope. A breakout board routes these pins to standard 0.1" headers, enabling rapid prototyping and reliable connections for op-amps, transceivers, and small power MOSFETs without requiring reflow equipment.
Component specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | Texas Instruments |
| Part Number | NE5532DR |
| Package | SOIC-8 (3.9×4.9mm) |
| Pin Count | 8 |
| Amplifier Type | Standard (General Purpose) |
| Current - Input Bias | 200 nA |
| Current - Output / Channel | 38 mA |
| Current - Supply | 8mA (x2 Channels) |
| Gain Bandwidth Product | 10 MHz |
| Number of Circuits | 2 |
| Slew Rate | 9V/µs |
| Voltage - Input Offset | 500 µV |
| Voltage - Supply Span (Max) | 30 V |
| Voltage - Supply Span (Min) | 10 V |
What's Included
BILL OF MATERIALS
- 1x NE5532DR soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS
WIDTH
< 0.9" (straddles breadboard)
PITCH
2.54mm standard
SOLDER
Lead-free, reflow assembled
FINISH
FR4, lead-free HASL