//
MCP602T-I/SN Breakout
OP AMP DUAL 2.8MHZ 2.7-6V 8-SOIC
View in 3D
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
Dual-channel CMOS operational amplifier with 2.8 MHz gain-bandwidth product, operating from 2.7V to 6.0V single supply. Features rail-to-rail output, input range including ground, and low quiescent current of 230 µA per amplifier. Ideal for battery-powered applications, A/D converter drivers, and sensor interface circuits.
Package: SOIC-8 (3.9×4.9mm) · 8 pins
Why does this need a breakout?
An 8-pin SOIC with 1.27mm pitch is too fine for breadboards and hand-soldering without a microscope. A breakout board routes these pins to standard 0.1" headers, enabling rapid prototyping and reliable connections for op-amps, transceivers, and small power MOSFETs without requiring reflow equipment.
Component specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | Microchip Technology |
| Part Number | MCP602T-I/SN |
| Package | SOIC-8 (3.9×4.9mm) |
| Pin Count | 8 |
| Amplifier Type | CMOS |
| Current - Input Bias | 1 pA |
| Current - Output / Channel | 22 mA |
| Current - Supply | 230µA (x2 Channels) |
| Gain Bandwidth Product | 2.8 MHz |
| Number of Circuits | 2 |
| Output Type | Rail-to-Rail |
| Slew Rate | 2.3V/µs |
| Voltage - Input Offset | 700 µV |
| Voltage - Supply Span (Max) | 6 V |
| Voltage - Supply Span (Min) | 2.7 V |
What's Included
BILL OF MATERIALS
- 1x MCP602T-I/SN soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS