//
MAX487EESA+T Breakout
IC TXRX RS-485 250KBPS 8-SOIC
View in 3D
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
Half-duplex RS-485/RS-422 transceiver with one driver and one receiver optimized for low-power industrial communications. Features ±15kV ESD protection, reduced slew-rate driver limiting EMI, fail-safe receiver, and quarter-unit-load input impedance supporting up to 128 devices on bus. Operates from single +5V supply with 120µA typical current and 0.5µA shutdown mode.
Package: SOIC-8 (3.9×4.9mm) · 8 pins
Why does this need a breakout?
An 8-pin SOIC with 1.27mm pitch is too fine for breadboards and hand-soldering without a microscope. A breakout board routes these pins to standard 0.1" headers, enabling rapid prototyping and reliable connections for op-amps, transceivers, and small power MOSFETs without requiring reflow equipment.
Component specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Part Number | MAX487EESA+T |
| Package | SOIC-8 (3.9×4.9mm) |
| Pin Count | 8 |
| Data Rate | 250kbps |
| Duplex | Half |
| Number of Drivers/Receivers | 1/1 |
| Protocol | RS422, RS485 |
| Type | Transceiver |
| Voltage - Supply | 4.75V ~ 5.25V |
What's Included
BILL OF MATERIALS
- 1x MAX487EESA+T soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS