//
74HCT4067PW,112 Breakout
MULTIPLEXER 16:1 CMOS 24-TSSOP
View in 3D
Want something different?
Bypass caps, pull-ups, strapping resistors, custom silkscreen & more
Design a Custom BoardAbout This Component
16-channel analog/digital multiplexer with single enable control in CMOS logic. Selects one of 16 input channels via 4-bit binary address lines for routing to a common output. Operates at 2-6V with low power consumption and TTL-compatible inputs, suitable for data acquisition, signal routing, and channel selection applications.
Package: TSSOP-24 (4.4×7.8mm) · 24 pins
Why does this need a breakout?
Hand-soldering 0.65mm pitch traces is difficult without proper equipment; a breakout board with standard 0.1in header spacing lets you breadboard-prototype and test these compact devices easily. Commonly used for I2C/SMBus I/O expanders and mixed-signal microcontrollers, this breakout eliminates fine-pitch soldering and allows rapid iteration during development.
Component specifications
ELECTRICAL CHARACTERISTICS
| Manufacturer | Nexperia USA Inc. |
| Part Number | 74HCT4067PW,112 |
| Package | TSSOP-24 (4.4×7.8mm) |
| Pin Count | 24 |
| -3db Bandwidth | 100MHz |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Number of Circuits | 1 |
| On-State Resistance (Max) | 120Ohm |
| Switch Time (Ton, Toff) (Max) | 65ns, 60ns |
| Voltage - Supply, Single (V+) | 4.5V ~ 5.5V |
What's Included
BILL OF MATERIALS
- 1x 74HCT4067PW,112 soldered onto breakout PCB
- Pin headers pre-soldered (2.54mm / 0.1" pitch)
- All IC pins broken out to 2.54mm headers
Breakout Board Design
PCB SPECIFICATIONS